For some reason, Preset 4 worked best for me, so my LCD reads "P - 4." This is the Logic Control mode for the MIDI desk and will be your working mode. Hold down the top left button and turn the machine on. I'm not entirely sure what some of them mean, but my board works now, so I'm not arguing. These are the correct settings according to an audio tech on Youtube. The fifth knob should be set to "id 1." The seventh knob should be set to "100." And the eighth knob should be set to "10." Then press exit. Using the first knob, make sure you are set on "u -1." The third knob should be set to auto. Before you turn on the machine, hold down the third button from the left in the top row and press the power button. Your Behringer BCF2000 needs to be set up the correct way. Youtube is much more helpful, but all the videos are for audio. The PDF manual from the website is not much help at all. There are, some things that you will need to be aware of to not pull all of your hair out. I expected a fair amount of problems, and I was not disappointed. Turning the plug-in on every time I go into Lightoom is a little bit of an annoyance, but.REAL SLIDERS!Īnd this is basically it. One you turn it on, it will ask for a MIDI In and MIDI Out. You must do it every time you start Lightroom and turn it off and on any time there is an error or you change something in the programming. In order for Knobroom to work in Lightroom, you must go to File > Plug-in Extras > Start Knobroom. These settings took a tremendous amount of trial and error. Here is a what mine ended up looking like. This is so that you know what command to program where. ![]() This program reads input from the MIDI controller desk and tells you which fader or knob corresponds to which number. So I set out to map all of the buttons and sliders that I was going to use. For me, the current mapping wasn't very conducive to my workflow. For those that go that route, at least you have directions. But with me not having one of those, it didn't help that much. There are step-by-step instructions for installing with a Novation Nocturn here. Once it is installed, click 'Import Mapping' and you can select the file that it comes with. Then, go to "Add Plug-in" and locate your file. Open Lightroom, and go to File > Plug-in Manager. As of this writing, I am using the latest beta. The most recent release as well as the latest beta release. One comment was all I needed to continue the quest of the Holy Lightroom Grail. I felt like an archeologist for geek-dom. I found one post in a comment (in a reply) that touted that Knobroom did, indeed, work with Lightroom 5. I read through basically all of the Knobroom website, as well as a fair amount from Paddy, scouring for an indication that I was on the right path and not waiting all of my time. BCF2000:1, Scalp:0.īefore buying the MIDI controller desk, I made sure to do as much research as possible. Third, I set this up with very little documentation on the subject and no real manual, so.yeah. Take that, unnecessary driver disk! Second, it will work with Lightroom 5, although not super easily and requires a few hard hours of customization. In fact, the drivers are already built into the operating system. ![]() I'm (un)happy to say that the answer to all three is 'yes.' First, the Behringer BCF2000 definitely will work on a Mac. "Will this make me very stressed and annoyed and angry and frustrated to set up?" "Will it work with Lightroom 5 (the last updates for the software came out right after 4 and were supposedly buggy)?" "Will this work well (or even at all) on my Mac (especially since there are no additional drivers or programs to map the board like on a PC)?" So a mere seven months after geeking out over the thought of using sliders with Lightroom, I had the device in hand. (Yes, I know all about return policies, but $125 was a risk I was fine taking - especially if it meant no shipping). I figured that I would wait to find one of these second-hand, just in case I couldn't get it to work. After reading the initial story, I scoured Craigslist for a Behringer BCF2000.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |